Robotic agent talk about the safety device of the robot
1. The manipulator uses the principle of pneumatic balance to grab the object, so the design of the safety device of the manipulator is particularly important. Do you know some details about the safety device?
2. Misoperation protection device: Monitor the movement speed of the robot arm to prevent accidental injury when the robot arm rises or falls rapidly during misoperation.
3. Supercharger: When the pressure of the on-site air source is not high, or unstable, the booster device can be selected to improve the working pressure of the air source and ensure the normal operation of the system.
4. Load-bearing limit protection device: When the robot grabs the overweight workpiece, the robot will give an alarm, and the safety valve will open when the weight is seriously overweight to prevent danger.
5, gas shut-off protection device: the use of check valves and gas storage tanks to ensure that the robot will not accidentally hurt after a sudden gas break, the robot agent prompts and can provide continuous and stable working pressure. Self-locking device for fixtures. The clamp is equipped with a shut-off valve to ensure that the clamp does not loosen when there is a sudden leak in the system.
6. Low-pressure alarm device: When the gas source works abnormally, the safety warning signal is detected and promptly given in time to remind the operator to take measures quickly.
7. Brake device: Brake device is installed at the link joint of the manipulator to prevent the manipulator from rotating or loosening, and is used to park the manipulator when the work is over.